HPLC SYSTEMS

Choosing an HPLC System for Analytical Laboratory Work

High-performance liquid chromatography (HPLC) systems are used in analytical laboratories to separate, identify and quantify compounds in liquid samples. Typical applications include purity and assay testing, impurity profiling, stability studies and the analysis of active ingredients, additives and contaminants in pharmaceutical, chemical, food and environmental samples.

A complete system combines a solvent delivery pump, an autosampler, a column oven, one or more detectors and chromatography data software. The way these modules are configured affects which methods the laboratory can run and how reliable its results are.

Sample Type and Workflow

The nature of the sample is the starting point. Small molecules, peptides, proteins and polymers place different demands on pressure range, flow rate and solvent compatibility. Workflow matters as well: a quality control laboratory running many routine samples benefits from automation and high sample capacity, while a method development laboratory may need more flexibility in solvents, gradients and column switching.

Sensitivity and Detector Compatibility

The required detection limits determine which detector is suitable. UV-Vis and diode array detectors cover many routine applications, while fluorescence, refractive index, electrochemical or mass spectrometric detection may be needed for compounds with weak UV absorbance or for trace analysis. The system should support the detectors that the laboratory’s methods require.

Column Compatibility and Method Requirements

The system must work with the columns that each method specifies, including their dimensions, particle size and pressure limits. Columns with smaller particles, as used in UHPLC methods, require higher pressure capability and low system dispersion. Existing validated methods, regulatory requirements and the need to transfer methods between laboratories should also be reviewed before choosing a configuration. For guidance on column selection, see our HPLC columns page.

HPLC Systems: Common Questions

What is the difference between HPLC and UHPLC?

UHPLC systems operate at higher pressures and are designed for columns packed with smaller particles. This can shorten run times and improve resolution, but the methods and columns must be suited to the higher pressure.

Which detector is most common in HPLC?

UV-Vis and diode array detectors are the most widely used, because many compounds absorb ultraviolet light. Other detectors are chosen when compounds do not absorb UV light, or when higher sensitivity or selectivity is needed.

When is preparative HPLC used instead of analytical HPLC?

Analytical HPLC identifies and measures compounds in small sample amounts. Preparative HPLC uses larger columns and higher flow rates to isolate and collect purified compounds for further use.

To discuss which HPLC system configuration suits your laboratory’s methods, contact Ophir Analytical.